Briggs And Stratton Oil Capacity Chart: A Comprehensive Guide
Are you tired of constantly checking your engine’s oil levels? Do you want to ensure your Briggs and Stratton engine runs smoothly without any hiccups? Look no further than the Briggs and Stratton Oil Capacity Chart. In this guide, we’ll go over everything you need to know about the oil capacity of Briggs and Stratton engines. From why it’s important to how to check and change the oil, we’ve got you covered.
Why Oil Capacity Matters
Oil is the lifeblood of any engine, and Briggs and Stratton engines are no exception. Without the proper amount of oil, an engine can quickly become damaged or even fail completely. That’s why it’s crucial to always maintain the correct oil level in your Briggs and Stratton engine.
The Risks of Low Oil Levels
Running an engine with low oil levels can cause a host of problems, including: – Increased engine wear and tear – Reduced engine lifespan – Increased fuel consumption – Overheating – Reduced engine power and performance
The Risks of Overfilling
Overfilling your Briggs and Stratton engine with oil can be just as damaging as running it with low oil levels. Some of the risks of overfilling include: – Increased oil consumption – Reduced engine power and performance – Increased engine wear and tear – Damaged spark plugs – Reduced fuel efficiency
How to Check Your Briggs and Stratton Engine Oil
Before we dive into the Briggs and Stratton Oil Capacity Chart, let’s go over how to check your engine’s oil level. 1. Warm up your engine by running it for a few minutes. 2. Turn off the engine and let it cool down for a few minutes. 3. Locate the oil dipstick and remove it. 4. Wipe the dipstick clean with a rag or paper towel. 5. Reinsert the dipstick and remove it again. 6. Check the oil level on the dipstick. It should be between the “Full” and “Add” marks.
Briggs and Stratton Oil Capacity Chart
Now that you know how to check your engine’s oil level, let’s take a look at the Briggs and Stratton Oil Capacity Chart.
Engine Model | Oil Capacity (oz) |
---|---|
450E, 500E, 550E, 550EX, 575EX, 600E, 625E, Lawnmower Engine | 15 |
625EXi, 675EXi, 725EXi, Self-Propelled Walk-Behind Lawnmower | 18 |
625EXi, 675EXi, 725EXi, Lawnmower Engine | 20 |
750EXi, 775iS, 850EXi, 875iS, 950iS, Lawnmower Engine | 21 |
950E, 1000E, 1000EX, 1100E, 1200E, 1200EX, 1250E, 1250EX, Lawnmower Engine | 18 |
950E, 1000E, 1000EX, 1100E, 1200E, 1200EX, 1250E, 1250EX, Self-Propelled Walk-Behind Lawnmower | 20 |
550EX, 625EX, 675EX, 725EX, 775iS, 850EX, 875iS, 950iS, 1000iS, 1100iS, 1200iS, 1250iS, Snow Blower Engine | 20 |
How to Change Your Briggs and Stratton Engine Oil
Now that you know how much oil your Briggs and Stratton engine needs, let’s go over how to change the oil. 1. Warm up your engine by running it for a few minutes. 2. Turn off the engine and let it cool down for a few minutes. 3. Locate the oil drain plug and place a container underneath it. 4. Remove the oil drain plug and let the oil drain completely. 5. Replace the oil drain plug and tighten it. 6. Remove the oil fill cap and pour in the recommended amount of oil. 7. Replace the oil fill cap and tighten it. 8. Run the engine for a few minutes to circulate the oil. 9. Check the oil level using the method outlined above.
Tips for Changing Your Briggs and Stratton Engine Oil
– Always dispose of used oil properly. – Use a funnel to avoid spills when pouring in oil. – Check the oil level before and after changing the oil to ensure you have the correct amount. – Follow the recommended oil type and viscosity for your engine.
Conclusion
Maintaining the correct oil level in your Briggs and Stratton engine is crucial for its performance and longevity. Using the Briggs and Stratton Oil Capacity Chart, you can ensure you always have the right amount of oil in your engine. By following the steps outlined in this guide, you can easily check and change your engine’s oil. Remember to always dispose of used oil properly and follow the recommended oil type and viscosity for your engine.