Briggs And Stratton Oil Capacity Chart: Maintaining Your Lawnmower For Optimal Performance And Durability

Are you tired of your lawnmower performing poorly or breaking down frequently? Did you know that one of the most common causes of lawnmower malfunctions is improper oil maintenance? According to Briggs and Stratton, a leading manufacturer of small engines, 40% of all engine failures can be attributed to poor oil maintenance. This is a shocking statistic that highlights the importance of proper oil maintenance for your lawnmower. In this article, we will discuss the significance of maintaining the oil in your lawnmower and how to do it properly. We will also provide practical tips and advice to ensure optimal performance and durability of your lawnmower.

Why Is Proper Oil Maintenance Important?

Oil is the lifeblood of your lawnmower’s engine. It lubricates the moving parts, reduces friction, and helps dissipate heat. Over time, the oil in your lawnmower breaks down and becomes contaminated with dirt, debris, and other particles. This can cause the oil to lose its lubricating properties and not function properly. If the oil is not changed regularly, it can lead to engine failure and costly repairs.

Briggs and Stratton Oil Capacity Chart

Briggs and Stratton recommends changing the oil in your lawnmower every 50 hours of operation or once a year, whichever comes first. However, the oil capacity and type of oil required vary depending on the engine model. To ensure that you use the correct oil and amount, refer to the Briggs and Stratton Oil Capacity Chart. This chart lists the oil capacity and recommended oil type for each engine model.

How to Check the Oil Level

Before checking the oil level, make sure that the lawnmower is on a level surface and the engine has cooled down. Then follow these steps:

1. Locate the dipstick on the engine.
2. Remove the dipstick and wipe it clean with a cloth.
3. Reinsert the dipstick into the engine and remove it again.
4. Check the oil level on the dipstick. The oil level should be between the “Full” and “Add” marks.
5. If the oil level is low, add the recommended oil type and amount to the engine.
6. Recheck the oil level to ensure that it is at the correct level.

How to Change the Oil

To change the oil in your lawnmower, follow these steps:

1. Drain the old oil. Place a container under the oil drain plug and remove the plug to drain the oil.
2. Replace the oil filter (if applicable).
3. Refill the engine with the recommended oil type and amount.
4. Check the oil level and add more oil if necessary.
5. Dispose of the old oil and oil filter properly.

Other Tips for Proper Oil Maintenance

In addition to changing the oil regularly, here are some other tips to help maintain the oil in your lawnmower:

• Use the recommended oil type and amount for your engine.
• Check the oil level before each use.
• Change the oil filter (if applicable) every other oil change.
• Store the lawnmower with a full tank of gas and fresh oil.
• Use a fuel stabilizer to prevent fuel from breaking down and contaminating the oil.

Conclusion

Proper oil maintenance is crucial for the optimal performance and durability of your lawnmower. By following the Briggs and Stratton Oil Capacity Chart and regularly changing the oil, you can prevent engine failure and costly repairs. Remember to check the oil level before each use and use the recommended oil type and amount for your engine. By taking these simple steps, you can ensure that your lawnmower will last for many years to come.